|
The Miniature Railway Supply Co Ltd
Miniature Railway Equipment Rail, Fittings, Sleepering,- steel or wooden 42 Stratford Way, Boxmoor Hemel Hempstead, Herts HP3 9AS ENGLAND Phone/24hr Answerphone 01442 214702 International Phone/Answerphone +44 1442 214702 www.miniaturerailwaysupply.com e-mail: sales@mrsc.org.uk |
|
| 21mm High Aluminium Rail |
 |
Flat Bottom Rail |
|---|---|
Suitable for 5" or 7 1/4" Gauge Club or Garden Railways |
|
Available in 3 or 4 metre lengths |
|
Finish: Ends cold sawn, unpunched |
|
Cutting tolerence is +/- 1cm |
|
Standard pack quantity 10 rails |
| Price per 3m length | Price per 4m length | ||
| Up to 21 metres | £5.92 per metre | 1-7 lengths £17.76/length | 1-5 lengths £23.69/length |
| 23-39 metres | £5.53 per metre | 8-13 lengths £16.59/length | 6-9 lengths £22.12/length |
| 40-99 metres | £5.05 per metre | 14-33 lengths £15.16/length | 10-24 lengths £20.21/length |
| 100+ metres | £4.78 per metre | 34+ lengths £14.36/length | 25+ lengths £19.15/length |
SPECIAL BULK RATE
300+ metres supplied in multiples of 10 rails @ ONLY £ 4.52 PER METRE
Fishplates
4 hole angle pattern, BZP steel @ £1.45 per pair (1 pair required for each rail
length)
Fishbolts and Nuts
Cup headed, Oval necked, M4 x 15mm BZP bolts and Nylock nuts,
sold in packs of 50 or 100 @ £ 10.42 per 100
Moulded Plastic Rail Chairs
2 types available for different sleeper material
Moulded slide on rail chairs to suit 21mm high aluminium rail with
flat base plate for use with wooden sleepers - £12.50 per 100
Screws to suit moulded plastic chairs and hardwood sleepers - £3.80 per 100
Moulded slide on rail chairs to suit 21mm high aluminium rail with
spigot to fit moulded plastic sleepers - £12.50 per 100
Screws to suit moulded plastic chairs and plastic sleepers - £3.80 per 100
Railscrews
2 types available for different sleeper material
Hex Headed (8mm hex) with flange underhead, 19mm long, pilot hole required when
used with hardwood,
sold in packs of 100 @ £4.00 per pack
Hex headed (8mm hex)with flange underhead, BZP, gash point which is self drilling
in softwood, supplied
25mm or 32mm long, sold in packs of 100 @ £7.00 per pack
| Rail curving: to customer's requirements | - £2.40 per 3m length |
| - £3.25 per 4m length |
Rail end punching for Fishbolts, 2 holes per end - £0.85 per end.
| |
