|
The Miniature Railway Supply Co Ltd
Miniature Railway Equipment Rail, Fittings, Sleepering,- steel or wooden 42 Stratford Way, Boxmoor Hemel Hempstead, Herts HP3 9AS ENGLAND Phone/24hr Answerphone/Fax 01442 214702 International Phone/Answerphone/Fax +44 1442 214702 www.miniaturerailwaysupply.com e-mail: sales@mrsc.org.uk |
|
| 2 lbs/yd (1kg/M)Steel Rail |
Approximate weight per 3 Metre length - 3.30kg |
Estimated Weight per Metre - 1.10kg |
Approximate yield of RAIL per tonne - 885 Metres |
 |
Price per 3 Metre Length |
|---|---|
-ends not drilled for Fishbolts |
|
-excluding carriage and VAT |
|
|
1 to 10 lengths @ £9.17 each |
|
|
11 to 20 lengths @ £8.85 each |
|
|
21 to 50 lengths @ £8.18 each |
|
|
51 to 100 lengths @ £7.91 each |
|
|
101 to 200 lengths @ £7.78 each |
|
|
201 to 250 lengths @ £7.58 each |
|
Bundle rate (random weight bundles, weights on application) |
|
|
@ £2020 per tonne |
Rail in "run of the bundle" condition as priced above is not warranted straight or kink free,
see below for curving or straightening options
Rail normally supplied only with appropriate quantities of Fishplates, Fishbolts and nuts. Prices as below.
Finish
Ends are bundle sawn and not holed for Fishbolts
Lengths are 3 Metres plus a cutting allowance of up to +/-10cm
Fishplates
4 hole angle pattern, BZP steel @ £1.05 per pair (1 pair required for each rail length)
Fishbolts and Nuts
Cup headed, Oval necked, M4 x15 BZP bolts and Nylock nuts,
sold in packs of 100 @ £6.50 per pack
Moulded Plastic Rail Chairs 2 types available for different sleeper material
Moulded slide on rail chairs to suit 21mm high steel rail with
flat base plate for use with wooden sleepers - £8.51 per 100
Screws to suit moulded plastic chairs and hardwood sleepers - £4.00 per 100
Moulded slide on rail chairs to suit 21mm high steel rail with
spigot to fit moulded plastic sleepers - £8.51 per 100
Screws to suit moulded plastic chairs and plastic sleepers - £4.00 per 100
Railscrews 2 types available for different sleeper material
Hex Headed with flange underhead, 19mm long, pilot hole required when used with hardwood,
sold in packs of 100 @ £4.00 per pack
Hex headed with flange underhead, BZP, gash point which is self drilling in softwood, supplied
25mm or 32mm long, sold in packs of 100 @ £7.00 per pack
Rail Straightening: £3.20 per length
Rail curving: to customer's requirements - £2.20 per length
Rail end punching for Fishbolts, 2 holes per end - £1.10 per end
|
|
